Snap-on 3 pc 1/4, 3/8 and 1/2 in. Drive Flex-Head TechAngle Torque Wrench Set, Very Lightly Used, Red PRO-FI Foam - ATECHFSET02R

Sale price  $1,799.00 Regular price  $2,475.00

Snap-on ATECHFSET02R

The full Snap-on TechAngle flex-head lineup in one red PRO-FI foam tray: 1/4, 3/8 and 1/2 inch drive, 15 in-lb all the way up to 300 ft-lb. This covers everything from valve cover bolts to axle nuts with the same screen, the same buttons and the same alerts on every wrench, so you are never relearning a tool in the middle of a job. The flex heads swing up to 15 degrees to get you around brackets and lines, and the ratcheting heads let you run the fastener down and torque it without pulling the wrench off.

Features

  • Torque then angle in one pull: set the torque, set the angle, the wrench walks you through both
  • Four alert modes so you feel it, hear it and see it: LED, LCD, vibration and audible
  • Dual progressive LEDs and a backlit LCD that goes bigger and bolder as you close in on target
  • Six scales: ft-lb, in-lb, N·m, kg-cm, dN·m and angle, plus ten presets for the specs you use every day
  • Torque accuracy ±2% clockwise and ±3% counterclockwise from 20 to 100% of full scale; angle ±1% of reading
  • Cycle counter, battery level indicator, low profile buttons and power interruption technology that keeps your setting if a battery bumps loose
  • Flex heads index up to 15 degrees and are built with extra torsional strength so the head stays put under load
  • Red PRO-FI closed cell foam resists oil, solvents and fuel, and drops straight into a 2 inch drawer

Included

  • ATECH1FS300V - 1/4 inch drive flex-head micro TechAngle torque wrench, 15 to 300 in-lb
  • ATECH2F125VR - 3/8 inch drive flex-head TechAngle torque wrench, 5 to 125 ft-lb
  • ATECH3F300VR - 1/2 inch drive flex-head TechAngle torque wrench, 15 to 300 ft-lb
  • FMTQ04B red PRO-FI foam tray with batteries pocket
  • Batteries for all three wrenches
  • Original Snap-on retail box

Condition

Very lightly used. These have barely been out of the foam. No scratches worth pointing out, no wear on the heads, screens are clean and all three power up, beep and buzz like they should. Comes in the original retail box with the batteries and the foam tray. Current Snap-on list price on this set is $2,475.

Shipping

Ships in a full length box, fully insured for the purchase price. The shipping charge you see at checkout already includes that insurance. US shipping only on this one.

Straight from the FixingCanoe stash. Buy more than one thing and it all combines into one order and one shipping charge. God bless.

Snap-on ATECHFSET02R 3 pc flex-head TechAngle torque wrench set, very lightly used, in red PRO-FI foam with retail box

You may also like